Quantcast
Channel: Intel Communities : Unanswered Discussions - Intel® NUC
Viewing all 6918 articles
Browse latest View live
↧

Nuc NUC7CJYH Blue screened, won't turn on for more than 20 seconds, no image on screen

June 14, 2018, 12:39 pm
$
0
0

Hi,

 

My girlfriend was watching youtube when the computer blue screened and said it needed to restart. The computer shut off. I turned it on and couldn't get image on the screen. I reseated the ram and the sdd but it would still only stay on for about 20 seconds and shut off. The LED is solid, no blinking. This was after having it on for a few hours. Any recommendations on what to do next?

 

2X

DDR4 4GB 2400MHz SO-D Pacific Sun

 

240GB Patriot Blast SSD

 

Thanks!

https://www.frys.com/product/9259849?site=sr:SEARCH:MAIN_RSLT_PG

↧
Search

NUC7i5BNH: No HDMI playback audio devices in Sound Control Panel, NUC hardware defect?

June 14, 2018, 2:17 pm
$
0
0

I want to play back audio via HDMI cable on the NETWORK STEREO RECEIVER Onkyo TX-L20D.

 

I had a look on this article "No Audio Through My HDMI Cable". But I didn't find any HDMI playback device in my sound control panel, even though the NUC and the Onkyo are connected via HDMI cable. This cable is working properly between the Onkyo and a TV screen.

 

I have already reinstalled the Intel display driver, here you can see an extract of the Detailed-System-Report.html.

 

Graphics

Intel® Iris® Plus Graphics 640
Adapter CompatibilityIntel Corporation
Video ProcessorIntel® Iris® Graphics Family
Resolution2560 x 1440
Bits Per Pixel32
Number of Colors4294967296
Refresh Rate - Current60 Hz
Refresh Rate - Maximum60 Hz
Refresh Rate - Minimum29 Hz
Driver ProviderIntel Corporation
Driver Version24.20.100.6136
Driver Date24.05.2018
Adapter DAC TypeInternal
Adapter RAM1,00 GB
AvailabilityRunning at full power
StatusThis device is working properly.
LocationPCI bus 0, device 2, function 0
Device IdPCI\VEN_8086&DEV_5926&SUBSYS_20688086&REV_06\3&11583659&0&10

 

 

Audio

Intel® Display-Audio
Driver ProviderIntel® Corporation
Driver Version10.24.0.3
Driver Date12.06.2017
Device IdINTELAUDIO\FUNC_01&VEN_8086&DEV_280B&SUBSYS_80860101&REV_1000\4&1A0C962&1&0201
Realtek High Definition Audio(SST)
Driver ProviderRealtek Semiconductor Corp.
Driver Version6.0.1.8192
Driver Date20.06.2017
Device IdINTELAUDIO\FUNC_01&VEN_10EC&DEV_0283&SUBSYS_80862068&REV_1000\4&1A0C962&1&0001

Regards

Holger

↧
↧

Screen flickering on 4k TV with video in browser

June 14, 2018, 8:04 pm
$
0
0

Hello, I am getting a little frustrated and would like some help. I am completely 100% updated on all drivers and the BIOS for my machine (NUC6I5SYH).

 

I am connected from my Nuc to a Samsung 4k TV (NU7100).

 

I have Kodi on my machine, and all video runs completely 100% fine from Kodi. However, as soon as I start streaming video on Chrome or Edge, the screen starts flickering. If I close the browser, the screen flickering stops. I am also including the information from me running SSU.

 

Please help me figure out how to stream video on my browser over a 4k tv. Please.

 

-James

↧

Getting Rid of Realtek Audio

June 14, 2018, 9:10 pm
$
0
0

Uninstalling Realtek Audio only works until windows update decides to update it.........

This is a method that I found on the Net that works, Windows update does not show Realtek Audio anymore.

I'm not sure if this affects the sd card reader since I dont use it?

--------

Here's how to permanently get rid of the Realtek driver:

① disable, disconnect or unplug any internet connection to prevent Windows from reinstalling the driver,

② uninstall "Realtek High Definition Audio Driver" and restart to make sure it's gone,

③ go to C:\Program Files and create a new folder called "Realtek",

④ open the properties dialog, go to the "Security" tab and click on "Advanced",

⑤ click on "Change Permissions", then "Disable inheritance", and in the new dialog select "Remove all inherited permission from this object",

⑥ click on "OK" and "Yes" etc. to apply the changes.

↧

Boxed Intel® NUC Kit, NUC7i5BNK, Single Pack Warranty replacment

June 15, 2018, 12:57 am
$
0
0

Hello,

I have a problem because NUC7i5BNK has been damaged and replaced by intel for a new one. Unfortunately, the customer had installed the purchased windows 10pro OEM that does not want to activate.

 

I am a customer service provider and maintainer, how to get Windows activation? Nuc worked only one month. The damage was not caused by the user.

↧
↧

NUC8i7HVK - Let us disable MicrofonArray in Bios

June 15, 2018, 3:53 am
$
0
0

Hell Intel,

 

Why isn't it possible to disable the MicrofonArray in Bios of the NUC8i7HVK?

With other NUC's you have that Option...

 

Thanks in advance.

↧

bios version 40

June 15, 2018, 12:35 pm
$
0
0

Hi,

 

Is there any exe version for bios version 40 for the NUC8i7HNK and HVK?

↧

NUC7i7BNH does not have UEFI PXE boot option

June 15, 2018, 4:51 pm
$
0
0

Hey, folks.

 

We have to deploy a large about of NUC workstations for a client which requires all of them to have BitLocker enabled. This cannot be done if the OS is not installed from (and subsequently booted) from UEFI.

 

When in the BIOS setup, I noted that the list of UEFI-available devices is missing LAN (PXE) as an option. It is available, and indeed works, as a Legacy boot option. I have updated the BIOS on the NUC7i7BNH tester model I have with the latest BIOS released on 05/28/2018 [BNKBL357.86A] using the F7 Recovery Flash method. Even after doing so, I'm in the same boat. I can UEFI boot a USB-attached drive, but not PXE boot. This is a problem as when we Legacy boot our WDS server to install the client's image, we cannot enable BitLocker as the OS does not boot UEFI after install.

 

Is there any way to get this model to UEFI PXE boot? I have attached screenshots so you can see what I see. Thanks in advance!

↧
Search

edit/remove username

June 15, 2018, 5:21 pm
$
0
0

When I signed up for this forum I put in a username now I'm trying to remove it since when you post it uses your name anyway...

But there is Nowhere to Edit or Remove the username.

Anyone figured out how to do that?

↧
↧

NUC7I3BNK impossible 4k@60hz with new amazon cable

June 16, 2018, 8:42 am
$
0
0

Hi everyone,

 

I bought a NUC7I3BNK for my TCL U55P006P. But I can use it at 60HZ. The software block the 60hz at 1920*1080, if I try to put it in 4K, I can only select 30hz.

I read that can come from my HDMI cable, so I bought a cable that can be use in 4k@60hz but nothing change, I'm still block at 30HZ.

 

  • Compatible avec le standard HDMI 2.0 (Vidéo 4K à 60Hz, 2160p, profondeur de couleur 48 bits/px) qui supporte une bande passante jusqu'à 18 mbps et est compatible avec les versions antérieures.

(That said that the cable is HDMI 2.0 and work at 60HZ in 4k.

(This one AmazonBasics Câble HDMI 2.0 haut débit Compatible Ethernet/3D/retour audio [Nouvelles normes] 0,9 m: Amazon.fr: High-tec…  )

So I go check the specs on my TV, all HDMI are 2.0b. I update my hdmi driver to the version 1.72, I update the drivers for the chipset and video.

I dont know what to do now?

 

Thank you for your help

Francois.D

 

Bonjour tous le monde,

 

J'ai acheté un NUC7I3BNK pour ma nouvelle TV, U55P006P mais impossible d'utiliser l'affiche en 4k à 60hz. J'ai mis à jour mes drivers (HDMI en version 1.72, ceux du chipset et de la partie video), et j'ai acheté un cable qui propose le 60hz en 4K, mais le probleme persiste, je ne sais plus quoi faire maintenant pour débloquer mon problème.

 

Merci d'avance pour votre attention,

Bonne journée,

Francois.D

↧

NUC7i3BNK NUC

June 16, 2018, 4:08 pm
$
0
0

Just bought the model NUC7i3BNK.

I have an 8MB memory and a 970 EVO. They seem to work.

I also bought a memory. I thought that I will copy the Ubuntu 18.04 in the memory and install it.

 

I have many problems and I need help.

1. The NUC It does not see the memory.

2. Is there a way to see the memory?

3. It need to install it and tells me to insert it in "boot."

4. Can you boot from the memory?

 

I don't know which is the "boot" device...

↧

NUC8i7HVK Vega 24.20 mouse lag

June 16, 2018, 8:54 pm
$
0
0

Hi everyone,

 

I have a strange situation when upgrading vega driver to the newest version (24.20.11001.1028). After upgrading (clean install) my mouse becomes very laggy when moving. I tried both wired and wireless (2.4ghz) mouses, same issue.

 

I downgradded to the older version (23.20.792.2048) and everything is back to normal.

 

Does anyone know what could be the issue?

 

I'm using Windows 10 pro 64-bit 1803, adata sx8200 pci-e, logitech g90 mouse.

↧

NUC8i7HVK - Can I use the new radeon driver 18.6.1?

June 17, 2018, 2:42 am
↧
↧

Bios fails to update from USB on NUC5i5MYHE

June 17, 2018, 5:08 am
$
0
0

I have a NUC5i5MYHE which still has the factory BIOS installed, running Manjaro Linux 64-bit.

Hoping to update the BIOS, I downloaded the "OS Independent" BIOS update iFlash BIOS update [MYBDWi5v.86A.0044.BI.ZIP].

I copied the .BIO file to a USB drive and shut down. On startup, I pressed F7 and got to the update BIOS menu. There I selected the USB, and then selected the .BIO file. A message appeared asking if I really want to update the BIOS using that file. I pressed Return to confirm.

Then the NUC rebooted and went to the normal Linux login screen. I logged in and checked the BIOS version; it was still the original version, not the new one.

I've done this twice. Any suggestions?

 

If you think the only/best solution to create a DOS boot disk and run the update from that, it would help to have a link to a page explaining how to do that for newbies.

 

Thank you!

↧

Nuc7i7dnke HDMI Firmware Update Failed and my HDMI port no longer works

June 17, 2018, 9:51 am
$
0
0

I was updating my HDMI with

HDMI 2.0 Firmware Update Tool for Intel

 

well when updating my pc rebooted and my HDMI no longer works , only the second one now works ( the one that says UHD)  i tried multiple times to have the first one work and there is no way i can get it to work.

any toughs?

↧
Search

Manjaro Linux on NUC9i7HVK possible?

June 17, 2018, 10:58 am
$
0
0

Hello together,

 

and sorry for my ugly and terrible english.

 

 

since a few days I try to install Manjaro Linux on my new Intelt NUC 8i7HVK 

 

I have tried many Linux-Live-Systems, so most is going work (boot to GUI) with the Bootoption "nomodeset".

 

But i would like a rolling System, with new Software in hope for new Kernel and new X.org...

 

for get this driver as soon

https://cgit.freedesktop.org/mesa/mesa/commit/?id=c6f1d360198c52d208645c0ccb5e988cded408e8

 

On the supportside of Intel:

Supported Operating Systems for Intel® NUC Products

 

ist this information:

Note If you need assistance with Linux* on Intel NUC, check your distributor's website and forums for peer assistance

 

so i try it in Manjaro-forum:

https://forum.manjaro.org/t/can-t-boot-manjaro-on-intel-nuc-8i7hvk/49957/10

 

is there any way to boot Manjaro-Linux on This NUC? <hopeful>

 

great regards

 

EgLe

↧

Received a replacement NUC; Windows 10 Pro won't reactivate with my original product code

June 17, 2018, 11:52 pm
$
0
0

I recently received a replacement for my defective Intel NUC8i7HVK.

 

I then removed the memory and SSD from the original NUC and installed them on the replacement NUC.  Everything appears to work fine except that Microsoft will no longer recognize the Windows 10 Pro operating system that I transferred via the SSD.  I've followed the Windows 10 instructions (Windows 10 works in a minimal way even without a product key) by both trying to activate Windows with my product code and also running the Troubleshooter.  But whatever I do the Troubleshooter says I now have an invalid product code. Please advise me what I should do.

 

For your convenience, I've attached the message saying 1) I need to activate the product key, and 2) that the product key I then entered is invalid. I get the same 2) message after running the troubleshooter.

↧
↧

How do I get 12V DC power out of a NUC8i7HVK?

June 18, 2018, 1:21 pm
$
0
0

I'd like to power a monitor which requires 12V and 1.5A input.

↧

NUC8i7HVK - "A bootable device has not been detected." despite SSD inserted and OS installed

June 18, 2018, 1:39 pm
$
0
0

Hi,

 

I've set up my Hades Canyon and was able to on first boot get Win 10 installed, added all the drivers, rebooted a couple times along the way. Didn't touch any BIOS settings, just wanted to get everything installed first before tweaking anything. I left the system off and went to boot it the next day and saw the message "A bootable device has not been detected."

 

I promptly went into BIOS and my Intel 760p SSD was no longer showing in the PCIe devices list. I had installed it into SSD Slot A. At this point I was on BIOS *.0029.*, so I went to see if a newer BIOS had been relased. *.0040.* was available so I installed that. System still refused to detect the installed SSD.

 

Only after unplugging and reinstalling the SSD, into either slot A or B, does it boot from SSD. But if I dare power down and attempt to restart, I'm stuck with the bootable device not detected message until the next time I manually intervene and reseat the SSD. I've installed SODIMMs and m.2 SSDs in the past and was sure to seat the device pins properly. I'm running out of ideas here! I've even cleared CMOS via the BIOS_SEC jumper inside the case.

 

I'm very confused because this isn't a total failure, as I was clearly able to make use of the SSD up until it quits being detected. Thanks in advance for any suggestions!

 

-Robert

↧

Power specification of internal SATA power connector?

June 18, 2018, 4:23 pm
$
0
0

I understand that the Thunderbolt 3 ports on the Hades Canyon NUC's support only 5V 3A of power output – the "up to 100W of power" commonly quoted with TB3 is an optional feature not included on these NUC's (see recent thread here).

 

It's commonly quoted that SATA power connectors can output 1.5A on each of the non-ground terminals (of which there are 9 – 3x3.3V, 3x5V and 3x12V). What are the power specifications of the internal SATA power connector?

 

I'd like to be able to use the SATA power connector to power a 12V 1.5A monitor, and according to the above Wikipedia entry, I'd just have to wire the 12V and ground up to a DC barrel and I'm good to go.

↧
Viewing all 6918 articles
Browse latest View live
Search