Quantcast
Channel: Intel Communities : Unanswered Discussions - Intel® NUC
Viewing all 6918 articles
Browse latest View live
↧

NUC 6i6SYK Screen turns black - HDMI 4K, miniDP - No picture

December 22, 2017, 1:58 am
$
0
0

Just bought the PC above, problems so far:

 

Installed latest bios and drivers, fully updated windows 10.

 

No Network card found when installing drivers, got it working eventually with old driver found over WiFi. Ethernet now working. Saw others had this problem too.

 

Tried getting 4K 60 Hz signal over the miniDP output, but no picture or signal, just black. Did not dare to set Bios at just DP, what if there is no Picture at all at boot?

 

With HDMI 4K 29/30Hz, the screen turns black for a second, but comes back, sometimes more seldom, other times all the time. Read the long thread about this problem with the NUC 7 series. Is the 4664 (or was it 6446?) version of the graphics driver recommended there working with the NUC 6 series?

 

How common is this black screen problem?, all devices or just a few? Both 6 and 7 series?

 

I tried lowering the resolution, but the screen flickering did not stop. Setting desktop zoom to zero got stable screen for a long time, but occational blackout still occurs.

 

Could it be related to the desktop zoom feature in windows? Power/heat/cable/drivers? The cabels work with othes PCs.

 

Sorry for the crappy English, not my first or second language.

↧
Search

NUC7i5BNH totally unresponsive

December 22, 2017, 2:02 am
$
0
0

Hi, I've just bought a NUC7i5BNH, but when I try to install the OS nothing happens.

 

The box says:

What's needed

DDR4 SO-DIMM RAM

M.2 SSD and/or 2.5'' SATA HDD/SSD

 

So I've installed this RAM V7 8GB DDR4 PC4_19200 _ 2400MHZ SO DIMM Notebook Memory Module _ V7192008GBS and this SSD (120GB, 2.5'') WD Green PC SSD - Solid State Drive | Western Digital (WD)

 

I've created a bootable USB drive with Windows 10, plugged it in, connected the NUC to a regular monitor via HDMI, connected an ethernet cable, keyboard and mouse: no response whatsoever.

Just a black screen (no signal detected), no BIOS, no error messages, no sound, the keyboard and mouse don't even appear to be powered up.

 

I had never used a NUC before but I just assumed it would work like a "normal" computer, am I missing something?

Since it's the second time (the exact same thing happened with a previous kit I sent back because I assumed it was malfunctioning), I must either be very unlucky or just too dumb to use one of these things.

What am I doing wrong?

Thanks!

↧
↧

NUC7i5BNK - Wake on TV not working after BIOS update to 60 and Win reinstall

December 22, 2017, 1:16 pm
$
0
0

I had to reinstall Win 10 on my NUC7i5BNK, so I decided to update BIOS too. I updated it from v. 54 to 60, reinstalled Windows and I cannot start my NUC by TV anymore. Other HDMI-CEC functions work OK (NUC is switched off with the TV and TV is switched on, when NUC is booting after press of the power button). It worked like a charm before the update... Any suggestions? Thank you.

↧

Thunderbolt Driver

December 22, 2017, 9:11 pm
$
0
0

I just purchased a Intel Nuc 6i7KYK for a live streaming/HD video broadcasting setup for our church.  I have the camera connected to the Thunderbolt and Nuc but nothing happens.  Can someone provide some details to how to install the driver or what is necessary to get the Nuc to recognize the thunderbolt and cameras.

↧

intel management engine interface

December 23, 2017, 2:16 am
$
0
0

problemi con aggiornamento, sul NUC 7i5BN, il software intel rileva l'aggiornamento si scarica e si installa ma dopo il riavvio del pc se rifaccio la rilevazione è ancora nello stato da aggiornare, altre periferiche sono a posto tutte aggiornate ringrazio anticipatamente dell'aiuto

↧
↧

NUC7i3BNH dont start after a bios update to 60

December 23, 2017, 11:05 am
$
0
0

Last night i did a bios update, from 57 to 60 and when it was finished it showed "update succesful" and the nuc shut down.

but it didnt booted back up.

 

i tried to start the nuc by pressing the powerbutton but nothing happend.

it just dont boot anymore, all i got is a amber powerbutton and when i press it it turns of for a split second but the nuc dont start.

 

i have tried to:

change the ssd

change the memory

new hdmi cable

other output device (monitor)

clear my cmos

 

the nuc dont start so i cant flash back a older bios.

 

what i got is:

a amber powerbutton

power on the usb ports

and a green licht on the motherboard.

 

does someone knows what to try or is the nuc broke?

↧

Samsung HW-K960 + 7i3bnh

December 23, 2017, 12:51 pm
$
0
0

Hi!

 

How to get my NUC working with my new HW-K960 soundbar?

 

when connected to soundbar hdmi 1 the screen is switching between no signal and Windows. Have to reset NUC something?

 

also is it working with one hdmi cable from nuc to soundbar to get atmos working?

↧

Nuc 7i7 Digital Microphone

December 23, 2017, 4:28 pm
$
0
0

Does anybody know what the digital microphone protocol on the NUC7i7 and 7i5BN boards is?  I believe it may be I2S but there is no clarification on what the data format and clock speeds are.   I am building a custom case for this board and want to set up Microsoft Cortona, however I need a digital microphone input to do so.  

 

thanks

Eric.

↧
Search

Intel nuc 5i3RYH and home theatre system

December 20, 2017, 3:40 am
$
0
0

Hello, help for this problem:

I have an Intel NUC 5i3RYH with WINDOWS 10 PRO 64bits  connected to a Samsung TV and to a home theater system like this:

Intel nuc with mini HDMI - HDMI cable at the input of the switch that I report in the picture below.

HDMI out of the switch to the Samsung TV and S/PFID out to the home theater system.

I downloaded and updated the REALTEK codecs to the R2.82 version.

 

Problem

From the audio settings of the control panel the system only detects the Samsung TV and speakers not connected and there is not digital S/PIFD audio.

because? How do you solve it?

 

Questions

I want to send the Dolby and DTS signal to the Home Theater system, can I do that?

 

Thanks to everyone who will answer me.

IMG_1.jpg

↧
↧

NUC6CAYH - Ubuntu 16.04 - Auto Power-On every day?

December 25, 2017, 3:20 am
$
0
0

Hi All,

 

I just purchased an Intel NUC to be used with Ubuntu 16.04,

I have found a gui utility to schedule the machine to turn off each night,

However, I am trying to find a way to get the machine to auto power-on/Start up each morning.

I have tried the Power - Scheduled Wake Up options in the BIOS, however it doesn't work. It will not power on.

Is this technically possible, ie, schedule a Non-Windows OS on Intel NUC to power-own each morning from either the BIOS or a GUI App (I dont want to manually run a script each day).

Thanks.

↧

NUC7i7BNH broken sensor after bios update 0060

December 26, 2017, 3:03 am
$
0
0

$ uname -a

Linux 4.14.8-1-ARCH #1 SMP PREEMPT Wed Dec 20 21:27:44 UTC 2017 x86_64 GNU/Linux

 

$ sensors

coretemp-isa-0000

Adapter: ISA adapter

Package id 0:  +34.0°C  (high = +100.0°C, crit = +100.0°C)

Core 0:        +34.0°C  (high = +100.0°C, crit = +100.0°C)

Core 1:        +33.0°C  (high = +100.0°C, crit = +100.0°C)

 

acpitz-virtual-0

Adapter: Virtual device

temp1:       -263.2°C << this one

 

iwlwifi-virtual-0

Adapter: Virtual device

temp1:        +47.0°C

 

pch_skylake-virtual-0

Adapter: Virtual device

temp1:        +37.0°C

 

It shows ACPI/DSDT parse errors, don't know if the kernel needs to be patched.

 

Another question in the BIOS the temps. are way higher then when booted into Linux, is this normal?

It displays ~58°C as CPU temp. idle. See above for idle temps. when booted.

 

Thanks!

↧

No splash screen "NUC" when connected to port HDMI

December 26, 2017, 7:20 am
$
0
0

Hi

When my NUC connected to LCD from port VGA splash screen "NUC" started :

IMG_0426.jpg

Why splash screen "NUC" not started when NUC5PPYH connected to port HDMI ?

 

LCD - BenQ VW2430H

 

Version BIOS - 86A.0064

in BIOS : IGD Primary Video Port - Auto , OS selection - Windows 7

↧

New NUC7i7BNH - CPU Core Temp Running at 70c While Idle

December 26, 2017, 12:53 pm
$
0
0

Hello,

 

I recently purchased a NUC7i7BNH and installed a 250GB Samsung 960 EVO M.2 SSD and 8GB of Crucial RAM.  I flashed the BIOS to BNKBL357.86A.0060.2017.1214.2013 and installed Windows 10 Pro with no problems.  However, the fan was running louder than I'd like.  I went into the BIOS to adjust the Fan Control Mode to "Quiet," but that didn't seem to have any effect.  I even changed it to "Fanless" and still no improvement.  The fan constantly runs at 3,400 RPM according to the BIOS, but I noticed that the CPU Core Temp is running at 70 degrees.  I wouldn't expect the temp to be that high in the BIOS.  Am I mistaken or is there something wrong with this unit?

 

Thanks in advance for any input.

↧
↧

nuc internal speaker

December 27, 2017, 12:41 am
$
0
0

hi

i is important that the nuc will have internal speaker

can you please add internal speaker in the future

what can i do to add a speaker to this units?

↧

NUC7i7BNH SSD tray - use or lose?

December 27, 2017, 9:55 am
$
0
0

I currently use a NUC7i7BNH with a "PCIe NVMe - M.2 Internal SSD" without a 2.5" SSD.  Should I be removing the 2.5" SSD tray completely to allow for more airflow inside the case, or keeping it in there?

↧
Search

NUC5i5RYH - Cannot install Win 10 on M.2

December 27, 2017, 3:04 pm
$
0
0

Hi, I've seen this asked but haven't seen a solution.

 

NUC5i5RYH - M.2 SSD - Win 10. - BIOS 367

 

When trying to install Win10 via USB. I get to the "Where do you want to install Windows" disk screen and even though I can see the M.2 disk, I get the error "Windows cannot be installed to this disk......"

 

Bios --> Devices --> SATA  I see the M.2 listed there.

Bios --> Boot --> Boot Priority I see "UEFI: USB:UEFI:USB:8.07:PART0:OS Bootloader...."

 

I have tried with and without UEFI enabled. 

 

Any ideas?

 

Thanks

 

Chris

↧

NUC7i7BNH refuses to hibernate after restart

December 27, 2017, 3:57 pm
$
0
0

Hi,

 

I'm not entirely sure whether the issue is NUC related or purely a Windows bug, but I only ever encountered it with the new NUC. The OS is Win 10 x64 Education with all patches installed to this date. I have a PCIe SSD, a SATA HDD and 8GB RAM installed.

 

The problem is the following: If the NUC boots up after a restart (regular restart button or "shutdown -r") and then I try to hibernate it, the screen goes dark for a second and then I'm immediately back to the lock screen (or to the desktop if entering the password after sleep/hibernate is disabled). If I try to hibernate it via command line ("shutdown -h"), it does the same and returns an error: "Insufficient system resources exist to complete the requested service (1450)." Sleep mode (S3, suspend to RAM) still works though. It also seems not to depend on whether the hybrid sleep mode or the quick boot mode is on in the power settings.

 

However, if I shutdown the NUC completely ("shutdown -s") and boot it up by pressing the power button, hibernation works again and I can boot up and hibernate indefinitely. Only if there is a restart in between, hibernation will stop working until it's shutdown and started up again via the power button.

 

That's very strange behavior and I don't know where to even start troubleshooting, as there is no error in the event log if the hibernation fails with the 1450 code. And since the problem consistently happens after a restart (i.e. where the NUC is not technically powered down before booting up), I suspect it might be hardware related...

 

Could anybody reproduce this?

↧
↧

Updated all drivers just fine - but... this one? Intel® Ethernet Connection I219-V ??????????

December 27, 2017, 4:56 pm
$
0
0

Intel® Ethernet Connection I219-V

 

 

 

 

______________________________________________________________

 

So all installed fine - scanning shows all have updated. Now matter how many times I install this update, it doesn't change.  Says latest version is 22.9

and says installed is   12.17.8.7 

I have done a full remove - and a uninstall of this from device manager.  Installed  LAAN_WIN (new version) and scanning says I still have same old version!?!?

 

________________________________________________________

win10 pro on i3 NUC kit.   SAYS THIS......

Intel® Gigabit Ethernet Network Connection Driver for Windows® 10 for Intel® NUC Kit NUC6i3SY, NUC6i5SY, NUC6i7KYK

22.9

 

12.17.8.7

Update available

 

This download record installs the LAN driver for Windows® 10, for the Intel® NUC Kit with the Intel® Gigabit Ethernet Network Connection.

December 26, 2017

 

76 MB

Learn more

 

  • ManufacturerIntel
  • AvailabilityRunning at full power
  • StatusThis device is working properly.
  • InstalledTrue
  • MAC AddressF4:4D:30:65:CB:0F
  • Service Namee1dexpress
  • Driver ProviderIntel
  • Driver Version12.17.8.7
  • Driver Date9/29/2017
  • Device IdPCI\VEN_8086&DEV_1570&SUBSYS_20638086&REV_21\3&11583659&0&FE
↧

NUC5PPYH sometimes speed fan max until I disconnect it from power

December 27, 2017, 6:58 pm
$
0
0

Hi

I have NUC5PPYH sometimes after restart the speed fan max and not sniping down until I disconnect it from AC power

what can i do

Thanks

↧

Windows 10 will not go to sleep in NUC7I7bnh

December 28, 2017, 2:39 am
$
0
0

I have a 7@I7 nuc,that will not go to sleep. I do not know if this is caused by Microsoft upgrades or Intel driver upgrades. I have tried the various fault finding procedures, on Google searches, but I cannot find anything wrong.

Any suggestions.

Johnno

↧
Viewing all 6918 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>